Hunter - Part 3

This article Hunter - Part 3 is one of the articles you were looking for? If true, you are very right here. OK here's the information on the article Hunter - Part 3.

If you’re looking for top recommended Product of the day, then Hunter - Part 3 is our suggestion. Many good reviews already proving the quality of this product. The Hunter - Part 3 completed with a lot of capabilities which makes it great product. If you wish to know further of this Product, just read its main features below.

Hunter - Part 3

 Part 1:
Two New Blades Started
 Part 2:
Hunter - Part 2

The first bit of brass is epoxied on and this is what's to follow - carbon fibre and more brass. Not a normal combination but I didn't want to use vulcanised fibre but wanted a good contrast. Hopefully it should work!!

And all glued up - the main part of the handle is Wenge. 

The photo below is rubbish but you can see the block in the pictures above being used as the background.

 I need to get a new blade for my bandsaw so instead of rough cutting the profile with the saw, I went at it with a fresh 80 grit belt this morning. Very aggressive and got a lot smaller very quickly!

I hadn't taken the KITH knife down with me so didn't have it to hand to compare. This one is basically a bigger version of it. 

The main thing that needs changing on the shape is the section where the first few fingers sit.

Thank you for reading the article Hunter - Part 3.We sincerely hope you can understand that our article Hunter - Part 3 is taken from various sources. If the article useful Hunter - Part 3 don't forget to share. Thank You.