Hunter - Part 2

This article Hunter - Part 2 is one of the articles you were looking for? If true, you are very right here. OK here's the information on the article Hunter - Part 2.

If you’re looking for top recommended Product of the day, then Hunter - Part 2 is our suggestion. Many good reviews already proving the quality of this product. The Hunter - Part 2 completed with a lot of capabilities which makes it great product. If you wish to know further of this Product, just read its main features below.

Hunter - Part 2

A blade previously started here:

Two New Blades Started

I have been doing more work on the EN9 blade but have been forgetting to record it.

So I had originally planned a wrought iron bolster. That was taking far too long so I decided to change to brass - much easier to work!!

So this morning I was at this point:

The bolster roughly fits but before I do any more filling, I wanted to cut it down to size.

Hacksaw rough cut:

then grinder to shape. Angled to start with to get the top outline quickly before I rubbed the marker pen away!

and then parallel sides.

The top lines will change at the end. It'll become clear later.

The slow job of getting that fit nice and snug now...

Thank you for reading the article Hunter - Part 2.We sincerely hope you can understand that our article Hunter - Part 2 is taken from various sources. If the article useful Hunter - Part 2 don't forget to share. Thank You.