Fallkniven F1 Rehandle - Part 3 / Re-start!

This article Fallkniven F1 Rehandle - Part 3 / Re-start! is one of the articles you were looking for? If true, you are very right here. OK here's the information on the article Fallkniven F1 Rehandle - Part 3 / Re-start!.

If you’re looking for top recommended Product of the day, then Fallkniven F1 Rehandle - Part 3 / Re-start! is our suggestion. Many good reviews already proving the quality of this product. The Fallkniven F1 Rehandle - Part 3 / Re-start! completed with a lot of capabilities which makes it great product. If you wish to know further of this Product, just read its main features below.

Fallkniven F1 Rehandle - Part 3 / Re-start!

I've just got hold of a Fallkniven H1 stick tang blade that'll need a new handle so I thought I should actually do something about the F1 that I started back in 2011!

This was the original few posts:

http://stewartjlight-knives.blogspot.co.uk/2011/03/starting-new-handle-for-fallkniven-f1.html

http://stewartjlight-knives.blogspot.co.uk/2011/04/fallkniven-f1-handle-mod-part-2.html

As you can see, I had originally planned a micarta bolster and cocobolo handle.

I decided to change that plan to a homemade micarta handle from some black denim and tan cotton using a technique I learned from Mike Reed.

So first off, a bit of chamfering of the 90 degree corners that will be visible afterwards. This will allow the micarta to flow around the tang more effectively.

and then some cutting up of the fabric....

into this.

Gluing and squishing to follow at a later date.

Thank you for reading the article Fallkniven F1 Rehandle - Part 3 / Re-start!.We sincerely hope you can understand that our article Fallkniven F1 Rehandle - Part 3 / Re-start! is taken from various sources. If the article useful Fallkniven F1 Rehandle - Part 3 / Re-start! don't forget to share. Thank You.