Svord Peasant re-build Part 4 (I think)

This article Svord Peasant re-build Part 4 (I think) is one of the articles you were looking for? If true, you are very right here. OK here's the information on the article Svord Peasant re-build Part 4 (I think).

If you’re looking for top recommended Product of the day, then Svord Peasant re-build Part 4 (I think) is our suggestion. Many good reviews already proving the quality of this product. The Svord Peasant re-build Part 4 (I think) completed with a lot of capabilities which makes it great product. If you wish to know further of this Product, just read its main features below.

Svord Peasant re-build Part 4 (I think)

Some projects just run on and on. Commissions push non-commissioned work down the pile so it's easy for things to get forgotten about.

With this one,the parts had been scattered around various boxes for a while, which didn't help, but even so, the first installment was August 2010!!

Svord Peasant re-build Part 1
Svord Peasant re-build Part 2 and other bits
Svord Peasant re-build Part 3

I've skipped on a bit since Part 3 to where I just picked it up now.

 Back spacer glued in place so that the blade edge doesn't come into contact with it.

The back spacer was then drilled, then the other side glued and pinned on.

A 'temporary' pivot out of a drill bit at the moment as that's the last part I need to find (or pinch off another Svord Peasant)

Top of the wood needs reducing down....

 ...so that it's flush with the blade tang.

 And then similar to the bottom of the handle for the blade edge.

Plenty more to do yet, but it's a step in the right direction....

Thank you for reading the article Svord Peasant re-build Part 4 (I think).We sincerely hope you can understand that our article Svord Peasant re-build Part 4 (I think) is taken from various sources. If the article useful Svord Peasant re-build Part 4 (I think) don't forget to share. Thank You.