Spyderco Pride rescale - Part 1

This article Spyderco Pride rescale - Part 1 is one of the articles you were looking for? If true, you are very right here. OK here's the information on the article Spyderco Pride rescale - Part 1.

If you’re looking for top recommended Product of the day, then Spyderco Pride rescale - Part 1 is our suggestion. Many good reviews already proving the quality of this product. The Spyderco Pride rescale - Part 1 completed with a lot of capabilities which makes it great product. If you wish to know further of this Product, just read its main features below.

Spyderco Pride rescale - Part 1

A re-scaling project where I've been given a bit of free reign.

The Spyderco Pride has aluminium scales that are fairly uninspiring and quite different each side.

The request was for micarta or G10 replacements but I decided that I'm going to go a little step further.

You can see the Pride resting on the Brown micarta that will be used for the scales. In the picture below, I have added some extra dots. They are where I will use Torx screws to attach the micarta scales to Titanium liners. The original screws will be hidden underneath the micarta. 

The original component parts.

So I missed out on taking pictures of drilling the holes in the Titanium.
Not too exciting but each hole needed two drill bits & one reamer.
- First use a 3.5mm bit to mark the centre of the hole, using the old scale as a guide for placement.
- Second drill out the hole with a 3.2mm bit.
- Third ream the hole with a 3.5mm reamer
- Repeat for each hole.

Beautifully lined up (but I just realised that I didn't drill out the lanyard hole!)

Next job that seems quite basic but is actually very important is to deburr all the holes.

More later...

Thank you for reading the article Spyderco Pride rescale - Part 1.We sincerely hope you can understand that our article Spyderco Pride rescale - Part 1 is taken from various sources. If the article useful Spyderco Pride rescale - Part 1 don't forget to share. Thank You.